source of the VisualDSP environment developed, targeted four processor is the co...

源程序是在VisualDSP环境下开发出来的，目标处理器是4片AD公司的TS1O1 DSP。IDE_FAT32用来在硬盘上创建FAT32文件系统；2）i2c_test编写IIC总线；3）codec_a_in_pal_cf_frame是加载到FLASH的程序，板子在脱离PC自动上电时会把PAL制的图像直接存到CF卡里，CF卡的文件系统是FAT16；4）codec_a_in_pal_buf_boottest是可加载的DSP图像直通程序；5）ADSP-TS101prog_driver是flash的驱动程序。-source of the VisualDSP environment developed, targeted four processor is the company"s AD TS1O1 DSP. IDE_FAT32 used in the drive to create FAT32 file system; 2) to prepare i2c_test IIC bus; 3) codec_a_in_pal_cf_frame FLASH is loading procedures, the board automatically from the PC on when power will be the PAL system images directly to CF card, the CF card is the FAT16 file system; 4) can be loaded codec_a_in_pal_buf_boottest DSP image through procedures; 5) ADSP-TS101prog_driver flash is the driver.

TCB_A.h
codec_a_in.dpj
codec_a_in.mak
codec_a_in_test.c
codec_test.ldf
coder_d_out.c
coder_d_out.ldf
data_a.asm
data_d.asm
dspa.dpj
dspa.ldf
dspa.mak
dspd.dpj
dspd.ldf
dspd.mak
i2c.c
i2c_ack.asm
sysinit.c
boot_data.asm
TCB_D.h