资 源 简 介
工程桩在施工时，一般进行编号，但当桩较多时，桩编号就显得特别麻烦，且容易出现重号。针对这些问题做了一个自动编号的程序（见下面 gczbhg6.vlx 文件)。本程序实现工程桩从上到下、从左到右进行顺序编号，且可消除重叠对象重复编号的现象。
使用方法：下载gczbhg6.vlx后，放入d:根目录，打开要修改的图形，在命令行输入(load "d:/gczbhg6.vlx") 加载成功后，在命令行输入 gczbh 按提示操作即可。
-Piles during construction works, ordinary numbers, but large piles, the pile numbers was particularly troublesome, and prone to re-number. To solve these problems has made a number of automated procedures (see below gczbhg6.vlx files). This program works to achieve pile from top to bottom, left to right to sequentially numbered, and can eliminate the phenomenon of overlapping objects duplicate numbers. Usage: After downloading gczbhg6.vlx placed in d: root directory, open the graphic you want to modify the command line, type (load " d:/gczbhg6.vlx" ) loaded after the success of the command line, type gczbh Follow the prompts to can be.
