With the program AD9854C.exe one can set and tune the frequency in CW
- 资源大小：48.92 kB
- 上传时间：2021-06-30
- 下载次数：0次
- 浏览次数：1次
- 资源积分：1积分
-
标 签：
SCM
others
资 源 简 介
With the program AD9854C.exe one can set and tune the frequency in CW-mode. For use as a receiver LO also IF can be given and the both possible receiving frequencies are printed on the screen. The level in Q-outputs can be varied by giving the wanted attenuation in dB. This function is done by controlling a 12b digital multiplier in the device. In this case the level decreases somewhat with increasing frequency as it does in DDS devices. Alternatively the inverse sinc correction can be chosen, in which case the output is flat and high. -With the program AD9854C.exe one can set and tune the frequency in CW-mode. For use as a receiver LO also IF can be given and the both possible receiving frequencies are printed on the screen. The level in Q-outputs can be varied by giving the wanted attenuation in dB. This function is done by controlling a 12b digital multiplier in the device. In this case the level decreases somewhat with increasing frequency as it does in DDS devices. Alternatively t
文 件 列 表
AD9854T.DAT
AD9854C.EXE
AD9854.HTM
DDS_LP3.GIF
AD9854_1.GIF
