wimax-scanner

Project goal We aim at creating an open-source WiMAX scanner/receiver. It should be able to capture mobile WiMAX aka 802.16e data from the air and decode it into bursts of bits. In other words, we aim at implementing a PHY level of mobile WiMAX receiver. When we reach this goal, we plan to continue with implementing a PHY level of mobile WiMAX transmitter to have a fully open-source mobile WiMAX modem. Hardware To make it clear: As far as we"re implementing PHY level, we use [Software Defined Radio](http://en.wikipedia.org/wiki/Software-definedradio) approach and do not rely on any existing WiMAX chips._ As a first step we plan to use USRP N200/N210 to capture WiMAX signal and then process it on usual x86 in offline- mode. Then we plan to move to make processing real-time by using a capable DSP, like 请点击左侧文件开始预览 ！预览只提供20%的代码片段，完整代码需下载后查看 加载中 侵权举报

frame_001.png
frame_002.png
frame_003.png
frame_004.png
frame_005.png
frame_006.png
frame_007.png
frame_008.png
frame_009.png
frame_010.png
frame_011.png
frame_012.png
frame_013.png
frame_014.png
frame_015.png
frame_016.png
frame_017.png
frame_018.png
frame_019.png
frame_020.png
frame_021.png
frame_022.png
frame_023.png
frame_024.png
frame_025.png
frame_026.png
frame_027.png
frame_028.png
frame_029.png
frame_030.png
frame_031.png
frame_032.png
frame_033.png
frame_034.png
frame_035.png
frame_036.png
frame_037.png
frame_038.png
frame_039.png
frame_040.png
frame_041.png
frame_042.png
frame_043.png
frame_044.png
frame_045.png
frame_046.png
frame_047.png
frame_048.png
frame_049.png
frame_050.png
frame_051.png
frame_052.png
frame_053.png
frame_054.png
frame_055.png
frame_056.png
frame_057.png
frame_058.png
frame_059.png
frame_060.png
frame_061.png
frame_062.png
frame_063.png
frame_064.png
frame_065.png
frame_066.png
frame_067.png
frame_068.png
frame_069.png
frame_070.png
frame_071.png
frame_072.png
frame_073.png
frame_074.png
frame_075.png
frame_076.png