资 源 简 介
olcdtool
olcdtool is an application used for communication to and from the Omnima LCD
Source code compiles and runs on Linux (KDevelop or make), Mac OS X (XCode) and Windows (Visual C++ 2010) and can be ported to other embedded platforms.
Uses
Send commands to LCD
Test LCD operation
Upgrade LCD firmware
Build your host application to run on Linux, Mac OS X or Windows based on the tested olcdtool code (use olcd.c, serial.c and platform.c)
Supported speeds
-Up to 1152000bps (84Kb/s) on Linux, Mac OS X and embedded devices such as MBed LPC1768, STM32 Discovery STM32F100 or STM32F103
-Up to 230400bps on Windows
Example commands
olcdtool
finds communication port and opens terminal access to the LCD
olcdtool -upload=firmware.hex
uploads new firmware to the LCD
ocldtool -smjpeg=file.jpg {or file.mov}
streams JPEG or MJPEG files to the LCD
ocldtool -cmd="any-s
